Preventive Maintenance should only be performed by an ibml trained technician.

  Vacuum the bottom of each frame (remove all debris)

Yes No

  Clean rear ImageTrac fan filters (pull off rear fan covers and vacuum each filter)

Yes No

  Clean all sensors (clean with dry swab)

Yes No

  Inspect and clean each ImageTrac Module

Yes No

               Check all belts for wear

Yes No

               Inspect all pulleys and rollers for loose set screws

Yes No

               Clean inside and beneath each module (remove all paper, dust and debris)

Yes No

  Clean inkjet orifice plate (if applicable) and verify all 32 channels print correctly

Yes No

  Clean all paper, dust, and debris from inside the onboard ImageTrac PC(s)

Yes No

  Clean the onboard PC filters

Yes No

  Check DC power supplies with the ImageTrac on and the track enabled (list voltages obtained for each frame)

Yes No

Perform a set light for the camera. Make additional adjustments only if necessary.

Yes No

Problems Identified

Actions Taken

Parts Used (name & part #)